Universal washer inlet valve with thermistor

Washer Water Inlet Valve with 50 ohm thermistor JA WV2

Part No. JA WV2


Washer Replacement Water Inlet Valve
This is a universal valve that fits a number of brands and models of top load washers including Whirlpool, Sears, KitchenAid, Roper, Estate, GE, Frigidaire and others.
Model: JA WV2
$59.95 New


The washer water inlet valve is an electrical device that controls the flow of water during the fill cycle.

Part Location

The water valve can be located by following the inlet hoses from the wall to the washer.  The hoses attach directly to the water valve.

Failure symptoms

Water valves usually fail to flow one temperature (hot or cold) at a time.  The valve can also fail to shut off the water flow when the washer is unplugged.  Both hot and cold water failing to flow at the same time is usually not the water valve.

Part Diagnosis

Measure voltage at each coil when washer is set to fill.  If there is 110 volts across the coil and water is no flowing, the valve is bad.  If water continues to flow when washer is unplugged, the valve is bad. Bring your “water valve” in for free confirmation that it is good/bad or call the U-FIX-IT store for free assistance with diagnosis.

Shipping Information

We ship across the continental US.
  • This field is for validation purposes and should be left unchanged.